Pages

Thursday, March 21, 2013

The Interfacing of Choice

There was some discussion when I posted my shirt muslin about which interfacing was best for a business shirt collar and cuffs.  I'd tried Pellon Shape Flex on the muslin and not been entirely happy with it.  At JoAnn's I bought some Pellon 950F Shir-Tailor.  And then at my local fabric shop when I was buying the shirt fabric, I asked if they had a good interfacing.

The lady at the counter produced a bolt of heavy woven fusible.  When I asked what it was called, she said, "Shirt Interfacing."  I checked the bolt itself but it was unmarked.  So I said, "I'll try a yard."

When I got started on my collar yesterday, I cut two collars and a piece of each interfacing.  I fused them to my fabric to see which one I liked better.  For me, the "Shirt Interfacing" won hands down.  It feels firm and crisp, but still allows the fabric to have some give.  (The Pellon 950F is a non-woven.)

I'm pretty sure that what I bought is the same thing as the Pro-Woven Shirt Crisp Fusible Interfacing sold by Fashion Sewing Supply.  It's about 48" wide and the characteristics match the description.  The price at my local fabric shop was $6 a yard - not nearly as expensive as I'd imagined a high-quality interfacing would be.

This morning I took a few comparison pictures for you guys who are interested.   First is a comparison of the textures, with the "Shirt Interfacing" on the left and the Pellon Shir-Tailor on the right.

 
The glue on the "Shirt Interfacing" is not bumpy like it is on a lot of other interfacings I've used.  Since this didn't come with directions, I had a little trouble at first getting it to fuse.  When I looked on the Fashion Sewing Supply website, I found a great instruction page and had much better luck when I followed their instructions.  

Rather than using the wool setting and pressing for 5 seconds in each place like I do with most fusibles, I used the highest setting on my iron with as much steam as I could get, and pressed for 20 seconds in each place, starting from the interfacing side.  Then I turned the piece over and did the same on the fabric side.  Finally, I kept the high heat and turned off the steam and pressed again on the fabric side.  Even with all that high heat and steam, there were some areas I had to go over again.

This next collage shows the difference in weight.  I threw in the Pellon Shape Flex I used on my muslin so you could see how much heavier this " Shirt Interfacing" is.  The Shirt Interfacing is on the left, Shir-Tailor in the middle and Shape Flex on the right.  I put a single layer of each on my very colorful guest room duvet  - notice how much color shows through on each.


I hope this is helpful for some of you.  It seems like it's not that easy to find information on interfacings and which ones to use for any given project.  That said, I think personal preference comes into play - personally I like a much softer collar on my own blouses.

Some people were also interested in whether I thought the David Coffin Shirtmaking book was worth buying and reading.  My answer is an unreserved yes.  I made my muslin with a combination of the pattern instructions and this book, but for my final shirt I'm going completely "by the book" and I think the results are really professional-looking.  Here's my collar, constructed as Coffin recommends.  Check out the built-in curve which will help it lay against the body nicely:


And here's a final sneak peek - I got as far as finishing the collar yesterday:


Not bad,  if I do say so myself!

18 comments:

  1. It makes sense to me that for a shirt collar you would want a more stable interfacing and will keep this one in mind if I ever venture into "formal shirt" making. Hubby's shirt is looking good!

    ReplyDelete
    Replies
    1. Thank you! I think I should have added that I might go with the Shape Flex if I wanted to do a button-down. This one is pretty stiff!

      Delete
  2. this does look very professional! thanks for sharing your thoughts and photos on the different interfacings, it's very informative!

    ReplyDelete
  3. Inquisitive describes your nature, Gail
    and it is serving you well.
    You are getting a gorgeous garment

    hugs

    ReplyDelete
  4. Wow, that is looking amazing. Perfection already, and white! My hat's off to you.

    ReplyDelete
    Replies
    1. Well, not absolute perfection ;-) But I will say that slowing down makes a big difference!

      Delete
  5. This is very helpful -- interfacings baffle me!

    ReplyDelete
    Replies
    1. Me too! I think there's a lot to learn about this!

      Delete
  6. looks great! i just love to see the collar curl up on it's own like that... so satisfying! thanks for the interfacing info. my interfacing method is to tack it down from the interfacing side, then spray the whole area lightly with water (the steam ability on my iron went out a while back from overuse...) then lay down a press cloth and press 10-15 secs at a time on high. i usually flip it over and press from the right side while it's still warm to make sure it's all smooth. seems to work well!

    ReplyDelete
    Replies
    1. I was pretty tickled too! It didn't work on my muslin - probably because of the poor quality of my fabric. It just didn't want to stretch. So I was psyched when it worked so well this time.

      I'll give your method a try. It would be nice if I could avoid getting those small areas that don't fuse unless I go over and over them.

      Delete
  7. That's some sewing science right there! I have no idea what type of interfacing I use. Haha :P

    ReplyDelete
    Replies
    1. Oh man, it's a whole "thing!" So much to learn!

      Delete
  8. Wow! You lost me at the beginning, but that last photo is ah may zing!

    ReplyDelete
    Replies
    1. I'm delving deeper and deeper into sewing geekery, LOL! Thank you - by now I've finished, and I'm really happy with how it turned out. I sure hope it fits well!

      Delete

Note: Only a member of this blog may post a comment.